30LB HIGH LOAD WEAR GUARD EPOXY
In stock
SKU
230-11490
MFG
11490
$874.56 / Each
Quick Overview
Devcon Wear Guard™ High Load
- MFG# : 11490
- Wear Guard High Load,
- 30 lb,
- Grey
- 1 Each
| Manufacturer | Devcon |
|---|---|
| Vendor Name | ORS |
| Item No | M63061 |
| MFG# : | 11490 |
| Features | Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8"|Will not sag on overhead or vertical surfaces|Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals|Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes|45-minute working time |
| Manufacturer URL | http://www.devcon.com |
| Unit of Sale | Each |
| Minimum Order (Quantity) | 1 EA |
| Standard Pack | 1 |
| Hazmat | No |
| Testing And Approvals | Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure |
| More Information | Adhesive Tensile Shear=1,474 psi|Applicable Materials=Ceramic; Concrete; Most Metals|Capacity Vol. [Nom]=30 lb|Capacity Wt. [Nom]=30 lb|Chemical Compound=Epoxy|Color=Grey|Compressive Strength=11,000 psi|Dielectric Strength=340 V/mil|Full Cure Time @ Temp.=8 h @ 75 °F|Gap Fill [Nom]=3/4 in|Hardness [Nom]=87 Shore D|Packing Type=Kit|Resistance=Hydrochloric Acid-10%; Sulfuric Acid-10%|Temp. Range [Max]=300 °F|Tensile Strength [Nom]=4,210 psi|Working Time [Min]=30 min|Wt.=30 lb |
Write Your Own Review